Download Free/Trial Version Of IPCOMServer
IPCOMServer is a cheap and easy solution to control RS-232 devices without the use of expensive router products like aCisco?? 2511 Terminal server. The IPCOMServer acts as a telnet server, connecting the user directly to a chosen COM port. IPCOMServercan be connected to by either using a Telnet program or a custom written Telnet Client. A Telnet program will provide the user with a textinterface to interrogate the attached RS-232 device. The reason why IPCOMServer was developed was to enable a user to control custombuilt electronic equipment, or to access remote control test equipment like, TTC Fireberd 4000?? or Protocol Analyzers etc.IPCOMServer acts as a virtual connection between a TCP/IP port or socket and a personal computers serial/COM port. When a Telnetprogram or client connects to IPCOMServer, it will be connected directly to the serial port specified in the Setup of IPCOMServer. Strings ofdata or commands that are generated at the Client will be transported across the TCP/IP network to the Host. At the host the incomingcommands are relayed to the serial port. The device attached to the host will react on the commands by sending replies back to the host,which are then relayed back the client. The replies can be used to display either text form or to update a graphical user interface (GUI). Seethe application notes for more information.
Tags: iox, pic, rs232, robot, tester, test, equipment, mcs51, ds5000, 16f876, 16f877, upicc, tcp, ip, internet, www, intranet, network, networking, hobbies, lab, communication, hardware, access, gpib, cisco, terminal, server, servers, modem, com1, uart,
